The first 24 hours of a Pump.fun launch follow one rhythm: prepare everything the day before, post the mint address and show up in the thread in the first 15 minutes, keep activity and replies steady through the first six hours, handle graduation if the curve fills, then claim rewards and plan day two before hour 24.
Key points
- Most launch work happens the day before: metadata, art, socials, wallets and the launch settings that cannot change later.
- The first 15 minutes are about one thing: getting the correct mint address in front of the people who planned to show up.
- Hours 1 to 6 reward steady, visible activity over one big burst.
- Graduation is automatic. Your job is to update links and get ready for the chart crowd.
- Close the day by checking the chain, claiming rewards and writing down what to do tomorrow.
What should you prepare the day before launch?
Everything you can.
The day before launch is when the real work happens. On launch day you'll be reading replies, watching the curve and answering messages at the same time, and there's no room for writing a description from scratch. Something isn't ready? Move the date. Nobody will remember a launch that came a day late, but people do remember a broken link.
- Name, ticker and description, written, spell-checked and read out loud once.
- A square image that still reads at thumbnail size. Coin pages and charts shrink it a lot.
- Website, X and Telegram links that work, with pinned posts ready to edit once the mint address exists.
- A fresh launch wallet holding only what you plan to spend, plus a small float for network fees.
- A decision on the dev buy: how much, if any, and whether you plan to hold it.
- A decision on where creator rewards go. Holder rewards and some other options have to be set when the coin is created.
What else needs deciding before launch day?
Creator rewards are the decision most often missed before launch. Pump.fun now lets a coin be created as a holder rewards coin, where the creator share of fees goes to holders instead of a creator wallet. It's set at creation. Read our guide to Pump.fun creator rewards before you pick, and check the official fee page the same evening, since Pump.fun revises it from time to time.
Line up your first audience too. Better a small group that knows the launch time, the coin name and where the address will be posted than a big group that might show up. Tell them the official address will appear in one place only, such as your pinned post, and nowhere else. That one rule protects them from copycats on the day.
What does a Pump.fun launch cost?
On the platform side, creating a coin costs 0 SOL. You pay the normal Solana network fee for the transaction. Any dev buy is a purchase of your own tokens, not a fee. Should the coin graduate, a one-off 0.015 SOL migration fee applies. Nothing else is on the list, and our Pump.fun fees guide goes through each item in order.
What happens in minutes 0 to 15?
You create the coin and, if you planned one, make the dev buy in the same flow. Then stop and check. Copy the mint address from the coin page, paste it into Solscan and confirm the name, the image and the supply look right. It takes thirty seconds. It's also the only way to be sure the address you're about to share is the real one.
Create the coin
Fill in the prepared metadata, choose your creator rewards option, add the dev buy if you planned one and sign the transaction. Creating the coin costs 0 SOL on the platform side, so the only charge is the normal Solana network fee. Holder rewards and similar options are fixed at this step, so double-check them first.
Confirm the mint on Solscan
Open the mint address on Solscan and check the name, the image and the supply. The check takes about thirty seconds and is the only way to be sure the address you share is the real one. Save the creation signature somewhere safe, since it records when and from which wallet the coin was created.
Post the address in one place
Update your pinned post with the mint address and the Pump.fun link, then share that post rather than the raw address. One official source matters because popular names get cloned within minutes, sometimes with the same image, and a raw address pasted into replies can end up sitting right next to a fake one. Whenever someone asks which coin is real, point them back to that single pinned post.
Start the thread
Leave a short first reply on the coin page so early visitors see someone is home. The thread is the first place many visitors look after the chart, and an empty thread in minute five reads like a creator who already left. One friendly reply that says where the official links live is enough to start.
Go live if you planned to
If you are doing a livestream, start it now, while early visitors are arriving. The first 15 minutes bring the people who planned to show up, and a live creator gives them a reason to stay on the page. Keep the stream running into the first hour, because visitors notice quickly when a creator disappears.
How do you handle copycat coins?
Copycat coins are the main risk in the first 15 minutes. Popular names get cloned within minutes, sometimes with the same image. That's why the single official post matters. When someone asks which coin is real in your Telegram, point them to the pinned post. Don't paste addresses in replies, where a fake can sit right next to yours.
How should you use the first hour?
Be present.
Think of the coin page as a live room: the first hour decides whether visitors stay. Answer real questions in the thread. Repost early holders' messages. Keep the livestream going if you started one. Creators who disappear right after launch are the clearest warning sign on Pump.fun, and visitors notice it quickly.
Watch the progress bar, but don't stare at it. Curve progress depends on net buying, and it moves in jumps. Ten quiet minutes? That's normal. What matters more is a steady stream of trades from different wallets, because that's what keeps a coin in the recent and trending feeds. Our page on how to trend on Pump.fun covers what those feeds appear to respond to and what nobody can promise.
Should you add scheduled activity in the first hour?
Scheduled activity is an option many creators weigh during the first hour. What a run does is spread ordinary swaps over many fresh wallets so the chart and trade list keep moving while real holders find the coin. Ours use 500 to 10,000 wallets, last from 15 minutes to 10 hours and cost a flat 1% of the volume goal, with a 100 SOL minimum target. Trading fees for the run are inside that price. You can set one up in the console before launch and pay the moment the mint address exists.
What should you do in hours 1 to 6?
Hours 1 to 6 are about settling into a rhythm. By now the launch rush fades, and your coin needs steady signs of life instead of excitement. Plan short check-ins rather than staring at the page for six hours straight. Each check-in, do the same few things.
- Reply to new comments on the coin page and answer real questions in your channels.
- Post one update on X with something new: a holder milestone, a meme, a short clip from the stream.
- Glance at the holder list. A wider spread of holders is healthier than a few large wallets.
- Check that your links still work and that the pinned post is still the top result in your channels.
- Get your DexScreener token profile ready, so you can submit it quickly if the coin graduates.
Why does holder retention matter in hours 1 to 6?
Holder retention is the share of wallets that keep a balance, and it matters because every coin page shows how many wallets hold the token, and visitors read that number. Wallets that buy and keep a small balance make the list look like a community rather than a revolving door. Our page on holder bots explains the difference between dust balances and real retention. In our runs, you choose what share of wallets keep a balance, from 20% to 80%.
Pace yourself as well. Six hours of constant replies is tiring, and tired creators make mistakes, like posting the wrong link or signing something they shouldn't. Hand the channel to a trusted mod for an hour if you can. Eat something. Don't worry, the coin will still be there.
What changes if the coin graduates?
Graduation happens on its own when the last tokens on the bonding curve are bought. Curve trading stops, the 0.015 SOL migration fee is taken and liquidity moves into a canonical PumpSwap pool, with the pool's liquidity tokens burned. Nobody needs to click anything. You'll find the full sequence in our Pump.fun graduation guide.
Your job is to catch the new audience. After graduation, more buyers arrive from charts and trackers rather than the Pump.fun board. Update your pinned post with the new chart link. Submit the DexScreener token profile you prepared. Tell your community that trading now happens in the pool, so nobody panics when the progress bar disappears.
Keep activity in the canonical pool, not in random other pools someone may open. Only the canonical pool feeds creator rewards, and it's the pair most charts pick up first. If a run is active when the coin graduates, ours follows it into that pool automatically at the same price. Our PumpSwap volume guide covers running activity there.
How should you close out hours 6 to 24?
Hours 6 to 24 are for reviewing what happened instead of reacting to it. Your coin has a history now, and the chain has a record of it. Spend half an hour checking what actually happened, not what the chart seemed to say. Our guide on how to verify volume on Solscan shows how to count trades, unique traders and SOL volume for any window.
- Claim creator rewards from your profile if you kept them, and confirm the claim on Solscan.
- Write a short day-one post: what happened, what's next, where the official links live.
- Thank early holders and the people who helped in the thread.
- Note what worked and what didn't: timing, posts, replies, any paid services.
- Decide on day two: another stream, a new update, more activity, or simply letting the coin breathe.
Then sleep. Seriously.
You'll get more from a clear head on day two than from an extra three hours of refreshing the chart at night. People who stay with a coin past the first day are usually the ones who trust the creator to keep showing up, and that's far easier when you aren't running on empty.
What are the most common day-one mistakes?
The most common day-one mistakes are preparation and security slips, and each one has a simple fix.
| Mistake | Why it hurts | What to do instead |
|---|---|---|
| Writing metadata on launch day | Typos and weak art stick to the coin for good | Finish and proofread it the day before |
| Posting the address in many places | Copycats slip in beside the real one | One pinned post as the single source |
| Vanishing after the first hour | Visitors read silence as abandonment | Short, regular check-ins |
| Ignoring graduation prep | Chart visitors meet an empty profile | Prepare the DexScreener profile early |
| Signing unknown transactions | One signature can approve a full drain | Never sign what you cannot explain |
None of these need money to fix. They need a plan and a bit of discipline. For the wider view of promotion beyond day one, our launch promotion checklist covers what to keep doing in the days after.
Quick answers
What should I do in the first 24 hours of a Pump.fun launch?
The first 24 hours of a Pump.fun launch run in five stages: prepare everything the day before, share the mint address from one official post in the first 15 minutes, stay active through hours 1 to 6, handle graduation if the curve fills, then claim creator rewards and plan day two before hour 24. Each stage has its own checklist above.
How much does it cost to launch on Pump.fun?
Launching on Pump.fun costs 0 SOL in platform charges, so you pay only the normal Solana network fee for the creation transaction. A dev buy is optional and buys your own tokens, which makes it a purchase rather than a fee. A one-off 0.015 SOL migration fee applies only if the coin graduates to PumpSwap, as the Pump.fun fees page lists.
When should I post the mint address?
The right moment to post the mint address is right after you confirm it on Solscan, a check that takes about thirty seconds inside the first 15 minutes. Put the address in one pinned post and share that post, not the raw address in replies. Popular names get cloned within minutes, so a single official source tells your audience where the real Pump.fun coin lives.
What do I need to do when my coin graduates?
Nothing on-chain is needed when a coin graduates, because migration is automatic. The curve stops, the 0.015 SOL migration fee is taken and liquidity moves into a canonical PumpSwap pool. Your part is to update links to the new chart, submit the DexScreener token profile you prepared and tell your community that trading now happens in that pool.
Can I change creator reward settings after launch?
Some creator reward settings are fixed for good at launch. Making a coin a holder rewards coin, where the creator share of fees goes to holders instead of a creator wallet, is set at creation. Decide the day before, read the Pump.fun fees page and the public docs on GitHub that evening, and pick before you sign the creation transaction.
Should I use a volume run on launch day?
A volume run on launch day is optional. Some creators schedule steady trading from many fresh wallets during the first hours so the page keeps moving while real holders arrive. A Softatjeh run uses 500 to 10,000 wallets over 15 minutes to 10 hours and costs a flat 1% of the volume goal, with a 100 SOL minimum target.
Keep the first hours moving
Schedule steady trading from many fresh wallets for anything from 15 minutes to 10 hours. Set it up in the console, see the flat price and pay by plain SOL transfer.
Mitchel Davis writes and maintains the Softatjeh guides and revises them whenever Pump.fun changes its curve, feed or PumpSwap rules. Found a stale number? Tell us at support@softatjeh.com.